To Next PageTo Next PageWhy is my Daewoo Washer making a vibrating noise?
If your Daewoo Washer is making a vibrating noise, ensure all transit bolts and packing have been removed according to the installation guide. If the noise continues, it could be due to an uneven wash load. Stop the washer and rearrange the load to balance it.
Why is my Daewoo Washer not spinning?
If your Daewoo Washer won't spin, check if the clothes in the drum are collected on one side. See if the washer is installed on an uneven floor or experiencing serious vibration. Also, make sure the door is closed properly; the lamp will light up if the door is open.
Why does my Daewoo DWD-F1033 stop during spinning?
If your Daewoo Washer stops during spinning or the spinning is insufficient, check the following: * Is the filter of the drain pump clogged? * Is the drain pump operating? * Did you use the proper amount of detergent? * Is the drain hose placed higher than 1m above the floor?
Why is my Daewoo DWD-F1033 Washer vibrating and too noisy?
If your Daewoo Washer vibrates excessively and is too noisy, ensure it's installed on an even floor. Also, check that all transit bolts have been removed.
How to fix a Daewoo Washer when the water drains slowly?
If the water in your Daewoo washer isn't draining properly or drains slowly, check the drain hose for kinks or clogs and clean and straighten it. Also, inspect the drain filter for clogs and clean it.
How to fix PFE PUMP FILTER ERROR on Daewoo Washer?
To resolve the PFE PUMP FILTER ERROR on your Daewoo Washer, clean the drain pump filter. If problems persist you should change the drain pump. Also use the proper amount of detergent and place the drain hose 1m below the floor.
How to fix H5 WATER TEMP. ERROR on Daewoo Washer?
To resolve the H5 WATER TEMP. ERROR on your Daewoo Washer, you should change the thermistor wash.
How to fix E9 SENSOR PRESSURE ERROR on Daewoo DWD-F1033?
To resolve the E9 SENSOR PRESSURE ERROR on your Daewoo Washer, you should change the water level sensor.
How to fix E4 LEAKAGE ERROR on Daewoo DWD-F1033 Washer?
To resolve the E4 LEAKAGE ERROR on your Daewoo Washer, check for leaks in the tub or the hose drain. Then change the tub or the hose drain.
How to fix Daewoo DWD-F1033 Washer that will not spin?
If your Daewoo Washer is not spinning, make sure that the door is firmly shut. Close the door properly and press the Start/Pause button. Note that it may take a few moments after pressing the button for the washer to begin spinning, as the door must lock first.
General| Loading Type | Front Loading |
|---|---|
| Dimensions (H x W x D) | 85 cm x 60 cm x 54 cm |
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
