To Next PageTo Next PageWhy is my Daewoo DWD-F1233 making a thumping sound?
If your Daewoo Washer is making a thumping sound, it's likely due to a heavy wash load, which is usually normal. However, if the sound persists, the washer may be out of balance. Stop the washer and redistribute the wash load.
Why is my Daewoo DWD-F1233 oversudsing?
If your Daewoo Washer is producing excessive suds, it may be due to using too much or an unsuitable detergent. Try using a suitable detergent and the correct amount for your load size.
What to do if my Daewoo Washer shows UE UNBALANCE ERROR?
To resolve the UE UNBALANCE ERROR on your Daewoo Washer, rearrange the laundry inside the drum. This error typically occurs when the laundry is concentrated on one side during the spin cycle.
Why is my Daewoo DWD-F1233 Washer making a vibrating noise?
If your Daewoo Washer is making a vibrating noise, ensure all transit bolts and packing have been removed according to the installation guide. If the noise continues, it could be due to an uneven wash load. Stop the washer and rearrange the load to balance it.
How to fix a Daewoo DWD-F1233 when the water drains slowly?
If the water in your Daewoo washer isn't draining properly or drains slowly, check the drain hose for kinks or clogs and clean and straighten it. Also, inspect the drain filter for clogs and clean it.
How to fix PFE PUMP FILTER ERROR on Daewoo DWD-F1233 Washer?
To resolve the PFE PUMP FILTER ERROR on your Daewoo Washer, clean the drain pump filter. If problems persist you should change the drain pump. Also use the proper amount of detergent and place the drain hose 1m below the floor.
How to fix H5 WATER TEMP. ERROR on Daewoo DWD-F1233?
To resolve the H5 WATER TEMP. ERROR on your Daewoo Washer, you should change the thermistor wash.
How to fix E9 SENSOR PRESSURE ERROR on Daewoo DWD-F1233?
To resolve the E9 SENSOR PRESSURE ERROR on your Daewoo Washer, you should change the water level sensor.
How to fix E4 LEAKAGE ERROR on Daewoo DWD-F1233 Washer?
To resolve the E4 LEAKAGE ERROR on your Daewoo Washer, check for leaks in the tub or the hose drain. Then change the tub or the hose drain.
How to fix Daewoo DWD-F1233 Washer that will not spin?
If your Daewoo Washer is not spinning, make sure that the door is firmly shut. Close the door properly and press the Start/Pause button. Note that it may take a few moments after pressing the button for the washer to begin spinning, as the door must lock first.
General| Loading Type | Front Load |
|---|---|
| Spin Speed | 1200 rpm |
| Color | White |
| Programs | 15 |
| Delay Start | Yes |
| Child Lock | Yes |
| Quick Wash | Yes |
| Dimensions (HxWxD) | 850 x 600 x 600 mm |
Diagrams and specifications for various DWD-F1X series washing machines.
Instructions for removing transit bolts and preparing the installation site.
How to clean the exterior, interior, and detergent case of the washing machine.
Step-by-step instructions for disassembling key components like the door lock and heater.
Diagram of the control panel for DWD-F1X1X series models.
Detailed breakdown of washing, rinsing, and spinning stages for different programs.
Procedures for testing the washing machine's operation and components.
Lists common issues like noise, leaks, and slow draining with their causes.
Diagram showing electrical connections to the main PCB and various components.
