To Next PageTo Next PageWhat to do if my Daewoo Washer shows UE UNBALANCE ERROR?
To resolve the UE UNBALANCE ERROR on your Daewoo Washer, rearrange the laundry inside the drum. This error typically occurs when the laundry is concentrated on one side during the spin cycle.
Why is my Daewoo DWD-F1243 Washer oversudsing?
If your Daewoo Washer is producing excessive suds, it may be due to using too much or an unsuitable detergent. Try using a suitable detergent and the correct amount for your load size.
Why is my Daewoo Washer making a thumping sound?
If your Daewoo Washer is making a thumping sound, it's likely due to a heavy wash load, which is usually normal. However, if the sound persists, the washer may be out of balance. Stop the washer and redistribute the wash load.
What to do for Daewoo DWD-F1243 IE WATER INLET ERROR?
If you are experiencing the IE WATER INLET ERROR on your Daewoo Washer, make sure the water tap is fully open. Also, check the filter of the valve inlet for any clogs and clean it if necessary. If problems persist you should change the valve inlet, water level sensor or drain motor. Also check the PCB ASS’Y.
How to resolve LE DOOR OPEN ERROR on Daewoo DWD-F1243?
To resolve the LE DOOR OPEN ERROR on your Daewoo Washer, ensure the door is closed properly. This error can occur if the Start/Hold button is pressed while the door is open. If problems persist you should change the switch door lock or the PCB ASS’Y.
General| Loading type | Front |
|---|---|
| Maximum spin speed | 1200 RPM |
| Spin Speed | 1200 RPM |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Color | White |
| Type | Front Load Washer |
Detailed specifications for DWD-F1X1X series washing machines, including dimensions and power.
Detailed specifications for DWD-F1X2X series washing machines, including dimensions and power.
Detailed specifications for DWD-F1X3X series washing machines, including dimensions and power.
Detailed specifications for DWD-F1X4X series washing machines, including dimensions and power.
Detailed specifications for DWD-F1X5X series washing machines, including dimensions and power.
Detailed specifications for DWD-F1X6X series washing machines, including dimensions and power.
Detailed specifications for DWD-F1X7X series washing machines, including dimensions and power.
Procedures for removing transit bolts to prevent transport damage.
Steps for connecting inlet/drain hoses and adjusting level for stability.
Detailed solutions for various error codes (IE, OE, UE, LE, E2, etc.).
