What to do if Daewoo Washer shows H4 THERMIST WASH OVERHEAT ERROR?
If your Daewoo Washer displays an H4 THERMIST WASH OVERHEAT ERROR, check the water level in the tub. If the error persists, consider changing the thermistor wash.
Why is my Daewoo DWD-FC1231 not draining properly?
If your Daewoo Washer isn't draining properly, start by checking the drain hose for any kinks or clogs and clean or straighten it. Also, inspect the drain filter for clogs and clean it thoroughly.
What to do if my Daewoo Washer will not spin?
If your Daewoo Washer won't spin, make sure the door is firmly shut. If it is not, close the door and press the Start/Pause button.
What to do if the door of my Daewoo Washer does not open?
If the door of your Daewoo Washer won't open, wait two minutes before attempting to open it. The door is designed to stay locked for safety reasons once a cycle has started.
How to fix water leaks in my Daewoo Washer?
If you notice water leaks from your Daewoo Washer, check the inlet and drain hoses at the tap and washer to ensure they are tightened. If the issue persists, your house drain pipes may be clogged, try to unclog the drain pipe or contact a plumber.
What does E5 HIGH VOLT ERROR mean on Daewoo DWD-FC1231 Washer?
If your Daewoo Washer displays an E5 HIGH VOLT ERROR, rearrange the laundry. If the error persists, consider changing the PCB ASS’Y.
What does UE UNBALAN ERROR mean on Daewoo DWD-FC1231 Washer?
If your Daewoo Washer displays a UE UNBALAN ERROR, rearrange the laundry inside the drum, as it is likely concentrated on one side during the spin cycle.
What to do if my Daewoo DWD-FC1231 Washer shows E4 LEAKAG ERROR?
If your Daewoo Washer displays an E4 LEAKAG ERROR, check the tub and hose drain for leaks. If you find any, change the tub or the hose drain.
How to stop rattling noise in Daewoo Washer?
If your Daewoo Washer is making rattling or clanking noises, there might be foreign objects in the drum or pump. Stop the washer and check both the drum and the filter.
How to solve E6 EMG ERROR on Daewoo Washer?
If your Daewoo Washer displays an E6 EMG ERROR, rearrange the laundry. If the error persists, consider changing the motor or the PCB ASS’Y.
Explains the purpose of transit bolts and the procedure for their removal and reinstallation.
Outlines the necessary conditions for the installation location, including floor level and clearance.
Details the steps for connecting the inlet hose to both ordinary and screw-shaped taps.
Explains how to properly install the drain hose to prevent damage and ensure correct drainage.
Guides on how to adjust the machine's feet for proper leveling to prevent noise and vibration.
Explains how to clean the water inlet filter, especially when an "IE" error occurs.
Details the procedure for cleaning the drain pump filter to ensure smooth operation.
Step-by-step instructions for removing and disassembling the door lock switch.
Guides on how to disassemble the heater and thermistor components.
Details the process of removing the universal motor from the washing machine.
Provides instructions for removing the drain pump assembly.
Displays an exploded view of the box inlet assembly with numbered parts.
Lists parts for the box inlet assembly, including part codes and specifications.
Outlines the sequence chart for Cotton, Synthetic, and Eco programs, showing progress times.
Details sequence charts for Wool, Delicate, Sports wear, Hand wash, and Quick 30 courses.
Explains the sequence chart for the Islamic Rinse option with Cotton/Normal course.
Details how to use the test mode to check PCB and machine operations, including error codes.
Provides a table listing common symptoms, their causes, and recommended solutions.
Details various error messages (IE, OE, UE, LE, E2, etc.) and their corresponding causes and solutions.
Illustrates the wiring connections to the main PCB and various components.
To Next Page
General
