To Next PageTo Next PageWhat to do if my Daewoo DWD-FC1011 Washer does not start?
If your Daewoo Washer doesn't start, ensure the power cord is securely plugged into the wall outlet. Also, check your house fuse or circuit breaker and reset it if necessary. Finally, make sure the water supply tap is turned on.
Why is my Daewoo DWD-FC1011 not draining properly?
If your Daewoo Washer isn't draining properly, start by checking the drain hose for any kinks or clogs and clean or straighten it. Also, inspect the drain filter for clogs and clean it thoroughly.
What to do if my Daewoo Washer will not spin?
If your Daewoo Washer won't spin, make sure the door is firmly shut. If it is not, close the door and press the Start/Pause button.
What to do if the door of my Daewoo DWD-FC1011 Washer does not open?
If the door of your Daewoo Washer won't open, wait two minutes before attempting to open it. The door is designed to stay locked for safety reasons once a cycle has started.
How to fix water leaks in my Daewoo DWD-FC1011?
If you notice water leaks from your Daewoo Washer, check the inlet and drain hoses at the tap and washer to ensure they are tightened. If the issue persists, your house drain pipes may be clogged, try to unclog the drain pipe or contact a plumber.
Why is my Daewoo DWD-FC1011 Washer making a vibrating noise?
If your Daewoo Washer is making vibrating noise, ensure that all transit bolts and packing have been removed. Refer to the installation guide if needed. Check that all the feet are resting firmly on the ground. If the noise continues, stop the washer and rearrange the wash load.
How to fix OE DRAIN ERROR on Daewoo DWD-FC1011?
If your Daewoo Washer shows an OE DRAIN ERROR, clean and straighten the drain hose. If the error persists, consider changing the drain motor, valve inlet, water level sensor, or the PCB ASS’Y.
What does LE DOOR OP ERROR mean on Daewoo Washer?
If your Daewoo Washer shows an LE DOOR OP ERROR, make sure the door is closed. If the error persists, consider changing the switch door lock or the PCB ASS’Y.
How to fix E2 OVERFLO ERROR on Daewoo DWD-FC1011 Washer?
If your Daewoo Washer displays an E2 OVERFLO ERROR, consider changing the valve inlet, the water level sensor, or the drain motor.
How to solve E6 EMG ERROR on Daewoo DWD-FC1011 Washer?
If your Daewoo Washer displays an E6 EMG ERROR, rearrange the laundry. If the error persists, consider changing the motor or the PCB ASS’Y.
General| Washing Capacity | 7 kg |
|---|---|
| Maximum Spin Speed | 1000 RPM |
| Noise Level (Washing) | 58 dB |
| Noise Level (Spinning) | 74 dB |
| Color | White |
| Programs | Cotton, Synthetic, Wool, Quick, Rinse, Spin, Delicate |
| Type | Front Load Washer |
Technical details for various Daewoo washing machine models, including DWD-FC1X1X to DWD-FC1X9X series.
Guidance on removing transit bolts, selecting location, and required clearances for installation.
Instructions for connecting inlet/drain hoses and adjusting the washing machine for a level installation.
Procedures for cleaning the washer's exterior, interior, and preparing it for freezing temperatures.
Steps for cleaning the water inlet filter, drain pump filter, detergent case, and washing drum.
Step-by-step instructions for disassembling the door lock switch, heater, motor, and drain pump.
Exploded views and part lists for assemblies like Box Inlet, Panel Front, Cabinet, and Tub.
Explains button functions and program selection across various Daewoo washing machine models.
Detailed sequence charts for Cotton, Synthetic, and Eco programs, including progress times.
Instructions for operating test modes, checking water level frequency, and performing durability tests.
Guides to diagnose and resolve common issues like noise, leaks, spin problems, and error codes.
Schematic showing electrical connections for main PCB, motors, valves, and other components.
