To Next PageTo Next PageWhy is my Daewoo DWD-FC1241 Washer making a thumping sound?
A thumping sound in your Daewoo Washer is usually normal with heavy loads. However, if the sound continues, stop the washer and redistribute the wash load to balance it.
Why is my Daewoo DWD-FC1241 not draining properly?
If your Daewoo Washer isn't draining properly, start by checking the drain hose for any kinks or clogs and clean or straighten it. Also, inspect the drain filter for clogs and clean it thoroughly.
What to do if my Daewoo DWD-FC1241 will not spin?
If your Daewoo Washer won't spin, make sure the door is firmly shut. If it is not, close the door and press the Start/Pause button.
What to do if the door of my Daewoo DWD-FC1241 does not open?
If the door of your Daewoo Washer won't open, wait two minutes before attempting to open it. The door is designed to stay locked for safety reasons once a cycle has started.
How to fix water leaks in my Daewoo DWD-FC1241 Washer?
If you notice water leaks from your Daewoo Washer, check the inlet and drain hoses at the tap and washer to ensure they are tightened. If the issue persists, your house drain pipes may be clogged, try to unclog the drain pipe or contact a plumber.
Why is my Daewoo DWD-FC1241 Washer making a vibrating noise?
If your Daewoo Washer is making vibrating noise, ensure that all transit bolts and packing have been removed. Refer to the installation guide if needed. Check that all the feet are resting firmly on the ground. If the noise continues, stop the washer and rearrange the wash load.
What does UE UNBALAN ERROR mean on Daewoo Washer?
If your Daewoo Washer displays a UE UNBALAN ERROR, rearrange the laundry inside the drum, as it is likely concentrated on one side during the spin cycle.
What to do if my Daewoo DWD-FC1241 shows E4 LEAKAG ERROR?
If your Daewoo Washer displays an E4 LEAKAG ERROR, check the tub and hose drain for leaks. If you find any, change the tub or the hose drain.
How to stop rattling noise in Daewoo DWD-FC1241 Washer?
If your Daewoo Washer is making rattling or clanking noises, there might be foreign objects in the drum or pump. Stop the washer and check both the drum and the filter.
How to solve E6 EMG ERROR on Daewoo DWD-FC1241?
If your Daewoo Washer displays an E6 EMG ERROR, rearrange the laundry. If the error persists, consider changing the motor or the PCB ASS’Y.
Technical specifications for the DWD-FC1X1X washing machine series.
Technical specifications for the DWD-FC1X2X washing machine series.
Instructions for removing and refitting transit bolts to prevent transport damage.
Guidelines for selecting a suitable installation location and ensuring proper clearance.
Procedure for adjusting the machine's feet to ensure stability and reduce vibration.
Explains the function of each button on the washing machine control panel.
Details the Time Save, Time Delay, and Child Lock features of the control panel.
Describes how to select wash programs using the control panel's program dial.
Displays the operational sequence and timing for various wash programs.
Shows the sequence chart specifically for the Islamic Rinse option.
Lists common symptoms, their causes, and corresponding solutions for troubleshooting.
Addresses issues related to the washer failing to start or spin properly.
Solutions for problems with the door lock, cycle timing, and stopping during operation.
Explains error codes (IE, OE, UE, LE, etc.) and their resolution steps.
Details troubleshooting for error codes H5, H6, H8, Ib, and PFE.
Electrical schematic illustrating the internal wiring connections of the washing machine.
General
