8
THE FUNCTIONS OF THE CONTROL PANEL
Program selector
For switching the washing machine on and off
and for selecting the program.
Can be rotated in both direction.
Even if the program selector rotates while the
program is running, the program is not changed
(except for off ) .
(All program is electronically controlled by PCB)
Indicator light
The respective indicator lights up,
When the required program
segment runs or “Time delay” is
selected.
Start/Hold button
For starting the washing cycle
(program must have been selected)
Button for options
(in addition to the program if required)
Time delay
To pre-engage time for washing.
As the button is pressed,
the delayed time is repeated
as following;
3hours
➝ 6hours ➝ 9hours ➝ 12hours
➝ 15hours ➝ No pre-engage➝ 3hours
Intensive wash Extended washing time.
Rinse + Extra rinse cycle.
Rinse Hold No final spin cycle
• Combination of additional option is possible.
• The indicator lamp of the buttons lights up
if options are active.
• Switch off option : Press button again.
To Next Page
Loading...
