Warning! If the lter is not reinsert-
ed or screwed tightly, the water could spill
from the machine.
!
To stop the ow:
Tighten the drain lter.
When no more water comes out:
Unscrew the entire lter.
Clean the lter.
Verify that the drain propeller rotates easily.
Remove any debris and clean the inside if there
should be any.
Replace the drain pump lter and screw it rmly.
DETERGENT DRAWER CLEANING
Having removed the detergent drawer, take
away the vent steam plate as shown in photo
below.
If it is clogged by foreign bodies or detergent, it
is advisable to break it small fragments taking
care not to push the lumps to the bottom to
prevent clogging of the internal circuit. Note
that the detergent is removed easily if treated
with hot water.
DWD-M_DWD-FI.indd 21 2015-05-27 오전 10:39:10
To Next Page
Loading...
Need help?
General
