»C
ooking in one stage
When you touch the START pad, the display counts down the time to show how much cooking time is left.
1. Touch the POWER pad.
(Select the desired power level.)
2. Touch the TIME SET pads for the cooking
time.
3. Touch the START pad.
The display will show what you touched
The display will show what you touched
X2
CONTROLS
Your oven can be programmed for 59 minutes 90 seconds. (59 : 90)
Using lower power levels increases the cooking time which is recommended for foods such as cheese, milk and slow
cooking of meats.
NOTE
All recipes require frozen foods to be defrosted fully before cooking. This oven can be programmed to automatically defrost
food before cooking.
»C
ooking in two stage
The display counts down the time remaining in DEFROST mode. Halfway through defrosting time, turn over, break apart and/or
redistribute the food. At the end of DEFROST mode, the oven will start M/W cook.
The display counts down the time remaining in M/W cook.
When the defrost cook is going on, if you touch the defrost pad, the display shows you “DEF” in 3 seconds.
When the defrost or MW COOK is going on, if you touch the POWER pad, the display shows you the current power level in 3
seconds.
1. Touch the DEFROST pad.
(Select the weight defrosting mode or the
time defrosting mode.)
2. Touch the TIME SET pads for the
defrosting time or weight you want.
3. Touch the POWER pad.
(Select desired power level.)
4. Touch the TIME SET pads for desired
cooking time.
5. Touch the START pad.
The display will show what you touched
“P-HI” is displayed.
The display will show what you touched.
This example shows power level 5.
The display will show what you touched
X2
X6
DESUK_KOR-6L7B3S(영).indd 10 2014-11-17 오후 3:27:31
To Next Page
Loading...
