©
200518 2-1
Steering gear and brake system
TECHNICAL DATA
ΧΦ65/65 (II) series
0
2. STEERING GEAR AND BRAKE SYSTEM
2.1 GENERAL
2.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
(1) Fit new original attachment bolt and self-locking nut.
Maximum steering ball joint axial clearance 1.5 mm
Bolt, steering column universal joint 56 Nm
(1)
https://www.truck-manuals.net/
To Next Page
Loading...
