©
200518 3-9
Inspection and adjustment
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΧΦ65/65 (II) series
5
3.9 CHECKING THE POLY V-BELT
1. Check the poly-V-belt for damage and signs
of serious wear.
2. Check the pulleys for damage, rust and
grease deposits.
Clean or replace the belt pulleys if
necessary.
Note:
Pay special attention to the plastic pulleys and
the water pump pulley.
Dirt can be scraped off the pulleys quite easily.
Take care not to damage the pulleys.
G000374
https://www.truck-manuals.net/
To Next Page
Loading...
