DAF CF65 - Effect of Diesel Fuel and Pto Hours on Maintenance Intervals; Maintenance in Special Operating Conditions; First Service Inspection

MAINTENANCE SCHEDULE
1-4
©
200518
Maintenance intervals
4
ΧΦ65/65 (II) series
1.3 EFFECT OF DIESEL FUEL AND PTO HOURS ON MAINTENANCE INTERVALS
Diesel fuels
PTO hours
PTO hours should be converted into mileage
according to the following formula:
1 PTO hour = 40 km
1.4 MAINTENANCE IN SPECIAL OPERATING CONDITIONS
Contact a DAF dealer/main branch or importer for
vehicles used in very specific or heavy
conditions.
The service intervals can be modified, if
necessary, in consultation with the dealer/main
branch or importer to fit the appropriate operating
conditions.
1.5 FIRST SERVICE INSPECTION
The first service inspection should be carried out
between the first 7,500 and 10,000 km or at most
8 weeks after delivery of the vehicle, whichever
comes first.
Note:
If the vehicle is fitted with a clutch wear indicator,
a mark (centre punch) should be made in the
wear indicator cover.
The mark should be placed exactly opposite the
middle of the indicator.
This mark is necessary to allow clutch wear to be
evaluated.
Sulphur content Engine oil change interval
> 0,2% Halve interval to max. of 25,000 km
https://www.truck-manuals.net/