DAF CF65 - Draining and Filling, Differential

©
200518 5-5
Draining and filling
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΧΦ65/65 (II) series
5
5.4 DRAINING AND FILLING, DIFFERENTIAL
To prevent skin injury, avoid
unnecessary contact with the
drained oil.
Draining the 1132 axle differential
1. Position the vehicle on a level surface.
2. Remove the level check/filler plug (1) and the
drain plug (2) using the special Torx wrench
(DAF no. 1329493). Drain the oil.
3. Fit the drain plug using the special Torx
wrench (DAF no. 1329493) and tighten it to
the specified torque; see "Technical data".
Filling the 1132 axle differential
1. Fill the differential gear via the level check/
filling opening (1) with the specified quantity
of oil; see "Technical data".
2. Check the oil level after approx. 5 minutes: it
should reach up to the level check/filler plug.
3. Fit the level check/filler plug (1) using the
special Torx wrench (DAF no. 1329493) and
tighten to the specified torque; see
"Technical data".
}
1
2
A800523
https://www.truck-manuals.net/