©
200515 5-9
Draining and filling
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΛΦ45/55 series
5
5.7 DRAINING AND FILLING, WHEEL HUB
To prevent skin injury, avoid
unnecessary contact with the
drained oil.
Note:
The design of the hub and the location of the
drain/filler plug may differ from the illustration,
depending on the version.
Draining the wheel hub
1. Position the vehicle on a level surface.
2. Position the wheels in such a way that the
drain/filler plug (1) is on the underside.
3. Place a suitable tray under the hub to collect
the oil. Remove the drain/filler plug (1).
4. Drain the oil and let the oil leak out of the
hub.
Filling the wheel hub
1. Position the wheels in such a way that the
drain/filler plug (1) is on the top side.
2. Fill the wheel hub with the specified, correct
quantity of oil, see "Technical data".
3. Apply sealant to the thread of the drain/filler
plug (1). Fit the drain/filler plug (1) into the
hub.
}
1
A8 00 427
1
A8 00 428
https://www.truck-manuals.net/
To Next Page
Loading...
