DAF LF45 - Page 113

©
200515 5-11
Draining and filling
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΛΦ45/55 series
5
EATON 6309A gearbox
To prevent skin injury, avoid
unnecessary contact with the
drained oil.
Draining the gearbox
1. Place the vehicle on a flat and level surface.
2. Drain the gearbox at operating temperature.
3. Remove the oil strainer/drain plug (4) and
the level check/filler plug (1) and drain the oil.
4. Clean the oil strainer (4) in a suitable solvent
and dry the oil strainer (4) thoroughly.
Filling the gearbox
1. Check and replace the O-ring (3) and the
sealing ring (2), if necessary.
2. Tighten the oil strainer/drain plug (4) to the
specified tightening torque. See "Technical
data".
3. Fill the oil through level check/filler opening
(1) until the oil reaches the rim of the filling
opening.
4. Fit level check/filler plug (1), tightening it to
the specified torque, see "Technical data".
}
1
2
3
4
V3 00 376
https://www.truck-manuals.net/