User’s Manual
58
Unlock pattern
Draw an unlock pattern.
After the setting is completed, the Password Protection interface is displayed.
The pattern that you want to set must cross at least four points.
If you do not want to configure the unlock pattern, click Skip.
Once you have configured the unlock pattern, the system will require the unlock pattern
as the default login method. If you skip this setting, enter the password for login.
Password protection
Configure the protection parameters for password.
After configuration, if you forget the password for admin user, you can reset the password
through the reserved email address or security questions. For details about resetting the
password, see 5.1.3.
If you do not want to configure the settings, disable the email address and security questions
functions on the interface.
To Next Page
Loading...
Need help?
General
