User's Manual
160
Snapshot
Select the
check box to take a snapshot of the selected
channel.
To use this function, make sure the following settings are configured:
The snapshot function is enabled for motion detect alarms in
Main
Menu > STORAGE > SCHEDULE > Snapshot
.
Select
Main Menu > CAMERA > ENCODE > Snapshot
, in the
list, select
.
Buzzer Select the check box to activate a buzzer noise at the Device.
Log Select the check box to enable the Device to record a local alarm log.
Voice Prompts
Select to enable audio broadcast/voice prompts in response to a
human face detection event.
Click Apply to complete the settings.
5.10.3.2 Searching for Detected Faces
Select Main Menu > FACE DETECT > SMART SEARCH.
Smart search
In the Begin Time box and End Time box, enter the time.
Click Search.
The faces searched in the defined period display.