User's Manual
249
FTP
Configure the settings for the FTP settings parameters.
Table 5-72 FTP parameters
Enable Enable the FTP upload function.
Host IP IP address of the PC that is installed with FTP server.
Port The default is 21.
Anonymity
Enter the user name and password to log in to the FTP server.
Enable the anonymity function, and then you can login anonymously
without entering the user name and password.
User Name
Password
Remote Directory
Create folder on FTP server.
If you do not enter the name of remote directory, system
automatically creates the folders according to the IP and time.
If you enter the name of remote directory, the system creates the
folder with the entered name under the FTP root directory first,
and then automatically creates the folders according to the IP and
time.