User's Manual
55
Encode
Configure the settings for the main/sub streams parameters.
Table 5-6 Main and sub streams parameters
Channel
In the
list, select the channel that you want to configure the
settings for.
Smart Codec
Enable the smart codec function. This function can reduce the video bit
stream for non-important recorded video to maximize the storage space.
Type
Main Stream: In the
list, select
,
(Motion Detect), or
.
Sub Stream: This setting is not configurable.
Compression
In the
list, select the encode mode.
H.264H: High profile encoding. Low bit stream with high definition.
This setting is recommended.
H.264: General profile encoding.
H.264B: Baseline profile encoding
. This setting requires higher bit
stream compared with other settings for the same definition.
Resolution
In the Resolution list, select resolution for the video.
The maximum video resolution might be different dependent on your
device model.
Frame Rate (FPS)
Configure the frames per second for the video. The higher the value, the
clearer and smoother the image will become. Frame rate changes along
with the resolution.
Generally, in PAL format, you can select the value from 1 through 25; in
NTSC format, you can select the value from 1 through 30. However, the
To Next Page
Loading...
Need help?
General
