User's Manual
89
Click again to stop calling the preset.
5.4.4.2 Calling Tours
On the expanded PTZ control panel, in the No. box, enter the value of the tour that you want
to call.
Click to call the tour.
Click again to stop calling the tour.
5.4.4.3 Calling Patterns
On the expanded PTZ control panel, in the No. box, enter the value of the pattern that you
want to call.
Call to call the pattern.
The PTZ camera moves according to the configured pattern repeatedly.
Click again to stop calling the pattern.
5.4.4.4 Calling AutoScan
On the expanded PTZ control panel, in the No. box, enter the value of the border that you
want to call.
Click .
The PTZ camera performs scanning according to the configured borders.
Click again to stop auto canning.
5.4.4.5 Calling AutoPan
On the expanded PTZ control panel, click to start moving in horizontal direction.
Click again to stop moving.
5.4.4.6 Using AUX Button
On the expanded PTZ control panel, click , the AUX setting interface is displayed.