Dahua HD IR Bullet Network Camera Quick Start Guide
Set the device network segment, login user name and password, and then click OK. The system
will display the searched devices after searching completes.
Step 4
Select the devices which need initialization and click Initialization. The system will display the
interface of Device Initialization, which is shown in Figure 3-1.
Figure 3-1
Step 5
Set new password and confirm password, select Email Address and input email address.
Note
The password can be set as 8 to 32 characters; it can be a combination of number(s), letter(s)
and symbol(s) with at least two kinds of them (excluding “'”,“"”,“;”,“:”,“&”). Please set password
with high security according to the password strong and weak prompt.
Step 6
Click Initialization, the system begins to initialize the device.
means initialization succeeded; means initialization failed. Click the icon to check more
details.
Step 7
Click OK to complete device initialization.
3.2 Modify IP Address
Step 1
Double click "ConfigTool.exe" and open quick config tool.
Step 2
To Next Page
Loading...
Need help?
General
