Dahua HD IR Bullet Network Camera Quick Start Guide
2 Device Installation
2.1 Install SD Card
Note
Please implement the step when the device is equipped with Micro SD card slot
and it needs to use Micro SD card.
Please cut off power before installing Micro SD card.
Step 1 Loosen the screw on the lower cover.
Open the lower cover and you can see the Micro SD card installation slot,
manual focusing lever or reset button.
Step 2 Please insert the Micro SD card into the slot which is shown in Figure 2-1, the
card slot is elastic so it only needs to press slightly to install the Micro SD card.
Figure 2-1
Note
Vari-focal series devices are equipped with motorized vari-focal lens by default, it
doesn’t need to adjust manually. For the device with manual focusing lever, it
supports focus and zoom via turning focusing lever.
Long press the reset button for 4~5 seconds to realize device reset function.
Step 3 Install back the lower cover, twist the screw and tighten it firmly.
To Next Page
Loading...
Need help?
General
