User’s Manual
284
Alarm center
Configure the settings for the alarm center parameters.
Table 5-55 Alarm center parameters
Parameter Description
Enable Enable the alarm center function.
Protocol Type
In the Protocol Type list, select protocol type. The default is ALARM
CENTER.
Server Address
The IP address and communication port of the PC installed with alarm
client.
Port
Auto Report Plan
In the Auto Report Plan
list, select time cycle and specific time for
uploading alarm.
Click Apply to complete the settings.
5.15.1.13 Configuring P2P Settings
You can manage the devices by using P2P technology to download the application and register the
devices. For details, see "5.1.4.5 Configuring P2P Settings".
To Next Page
Loading...
Need help?
General
