User’s Manual
76
By clicking , the Camera List page is displayed. For details about adding the remote devices, see
"5.6 Configuring Remote Devices".
5.2.3 Navigation Bar
You can access the functions to perform operations through the function icons on the navigation bar.
For example, you can access Main Menu and switch window split mode.
The navigation bar is disabled by default. It does not appear in the live view screen until it is enabled.
To enable it, select Main Menu > SYSTEM > General > Basic, enable the Navigation Bar, and then
click Apply.
Navigation bar
Table 5-9 Navigation bar description
Icon Function
Open Main Menu.
Expand or condense the navigation bar.
Select view layout.
Go to the previous screen.
Go to the next screen.
Enable tour function. The icon switches to .
Open the PTZ control panel. For details, see "5.4 Controlling PTZ
Cameras".
Open the Image page.
This function is supported only in single-channel layout.
Open the record search page. For detail, see "5.9 Playing Back Video".
Open the Alarm Status page to view the device alarm status. For
details, see "5.21.3 Viewing Event Information".
Open the CHANNEL INFO page to display the information of each
channel.
Open the Camera List page. For details, see "5.6.1 Adding Remote
Devices".
To Next Page
Loading...
Need help?
General
