DH-PFM881 User Manual All Right Reserved
Page 7
3. Embedded hardware watchdog
DH-PFM881 is embedded with hardware watchdog, which is used to monitor the
working status of the device. Once the system is not working properly, the
DH-PFM881 device can be rebooted to guarantee the stability of the system.
4. Software Ping watchdog function
DH-PFM881 software ping watchdog function enable the device periodically ping
another device associated to, so that it can detect if the system is working well. If
the wireless link is lost or there is any problem, the device is rebooted. This is
important because the devices can be restored to work automatically if there is
any problem, and avoid the extra human labour to maintain the outdoor devices.
5. More Non-standard channels availability
Currently most of the WIFI devices are working at standard 802.11 5.8GHz
frequency. However, standard 802.11 5.8GHz only provide limited channels, and
there is serious interference if there are a lot of 5.8G WIFI devices nearby.
DH-PFM881 support more channels near 5.8GHz band, and spread the band to
non-standard frequency part: 4920MHz-6100MHz。The advantage of working at
the non-standard band is to avoid the interference in the standard channels, and
the wireless throughput can be improved.
Note: Please confirm whether those non-standard channels are permitted locally
before using them.
6. Outdoor industrial product
DH-PFM881 device can work at all kinds of outdoor severe environments,
including -30 to 70 degree temperature, 5% to 95% humidity, while maintain good
performance.
1.2 Electrical Specifications
The electrical specifications are shown are the following table:
Table 3 Electrical Specifications
Items Specifications
To Next Page
Loading...
Need help?
General
