DH-PFM881 User Manual All Right Reserved
Page 15
2.2 Restore to the Factory Settings
In some cases, uses can restore the device to the factory settings by the following
way in the Figure 4. Push the reset button for 5~10 seconds until all LED is on. This
will restore to the factory setting. During this process, the DH-PFM881’s RJ45 ports
will be connected and disconnected twice.
Figure 4 Restore to the factory settings
For default, all the factory settings are shown in the following Table 6.
Table 6 Main parameters at the factory settings
Items Default Settings
IP address 192.168.1.36
User name admin
Password admin
Wireless mode Station
SSID DaHua
Output power High(24dBm)
Encryption WPA->WPA2->CCMP- ：>Password 1234567890abc
Network mode Bridge
3 Quick Configuration
This chapter describe how to configure the device quickly.
To Next Page
Loading...
Need help?
General
