16
New User Info
Configure parameters on the interface.
Table 3-3 New user parameter description
Enter user IDs. The IDs can be numbers, letters, and their combinations, and
the maximum length of the ID is 32 characters. Each ID is unique.
Enter names with at most 32 characters (including numbers, symbols, and
letters).
Make sure that your face is centered on the picture capturing frame and the
access controller will take a picture of the new user’s face automatically.
You can register five cards at most for each user. On the card registration
interface, enter your card number or swipe your card, and then the card
information will be read by the access controller.
You can enable the Duress Card function on the card registration interface.
After enabling the duress function, an alarm will be triggered if a duress card is
used to unlock the door.
Only certain models support card unlock.
The door unlocking password. The maximum length of the password is 8 digits.
You can select a user level for new users. There are two options:
User: Users only have door unlock permission.
To Next Page
Loading...
