56
Table 4-7 Data rate parameter description
There are two options: NTSC and PAL. Select a standard
according to the video standard of your region.
There are two options: 1 and 2. 1 is white light camera and 2 is IR
light camera.
There are four options: D1, VGA, 720p and 1080p. Select an
option according to the video quality you want.
720p is set by default. If you need the call function, do not set it to
1080p.
The rate at which consecutive frames appear on a display. The
frame rate range is 1–30 fps.
The number of bits that are conveyed or processed per unit of
time. There are five options: 2 Mbps, 4 Mbps, 6 Mbps, 8 Mbps,
and 10 Mbps.
There are three options: D1, VGA, and QVGA.
The rate at which consecutive frames appear on a display. The
frame rate range is 1–30 fps.
The number of bits that are conveyed or processed per unit of
time. There are options: 512 Kbps, 640 Kbps, 768 Kbps, 896
Kbps, 1024 Kbps, 1.25 Mbps, 1.5 Mbps, 1.75 Mbps, and 2 Mbps.
4.7.2 Image
There are two channels, and you need to configure parameters for each channel.
Select Video Setting > Video Setting > Image.
Image
To Next Page
Loading...
