32
Features
Table 3-10 Feature description
See "3.12.1 Privacy Setting" for details.
If the third-party card reader needs to be connected to the access
controller through the wiegand output port, you need to enable the
Card No. Reverse function; otherwise the communication between
the access controller and the third party card reader might fail due to
protocol discrepancy.
If the security module is enabled, you need to purchase access
control security module separately. The security module needs
separate power supply to provide power.
Once the security module is enabled, the exit button, lock control
and firefighting linkage will be invalid.
Display a heat map at the upper-left corner.
External Reader
Temp Monitoring
Turn it on and the temperature of the person will be monitored when
he/she swipes the card.
There are two options: NO and NC.
Displays whether the unlock succeeded or failed.
To Next Page
Loading...
