GUI Operations 11
4.4 Registration
Select Main Menu > CAMERA > Registration. The Registration interface is displayed. See
Figure 4-5.
You can register remote devices through the following two ways:
Click Device Search. In the result list, double-click the remote device or select the check
box in front of the device, and then click Add to register the remote device.
Click Manual Add and enter the IP address of the remote device to register it.
Registration Figure 4-5
4.5 Schedule
All channels are 24-hour recording continuously by factory default. You can customize the
record period and record type.
Select Main Menu > STORAGE > SCHEDULE > Rec. Step 1
The Rec interface is displayed. See Figure 4-6.
To Next Page
Loading...
