P2P 15
6 P2P
Scan the QR code with the cell phone to download and install the mobile app. Step 1
You can get the mobile app QR code and device SN QR code through the following two
ways:
Log in the local interface and select Main Menu > NETWORK > P2P.
Log in the Web interface and select Main Menu > NETWORK > TCP/IP > P2P.
Mobile app QR code Figure 6-1
Register device on the mobile app Step 2
After registering the device successfully, you can view the monitor screen on the cell
phone app.
The following figures are for reference only. The actual product shall govern. For
detailed information, see User’s Manual.
Tap , select Device Manager, and then tap . See Figure 6-2. 1)
P2P (1) Figure 6-2
Tap the corresponding device type (WIFI Device or Wired Device) and then tap 2)
P2P to register the device. See Figure 6-3.
To Next Page
Loading...
