24
5 System Settings
5.1 Setting the Date and Time
You can set time and date for the box. Remember to select a correct time zone based on where the
box lies.
Step 1 On the home page, select
Settings
>
Date & Time
.
Figure 5-1 Date & time
Step 2 Set date, time, and time zone. You can also enable the 24-hour format.
Step 3 Enable IPC time setting, configure the
Renewal cycle
(24 hours by default), and then click
Save
.
The time of IPC will be synchronized with that of the box within the defined renewal cycle.
Step 4 Enable NTP time setting, configure the
Renewal cycle
, and then click
Save
.
The time of the box will be synchronized with that of the NTP server within the defined
renewal cycle.
5.2 Selecting the Input Source
Input sources include
Local
(default) and
HDMI
.
●
Local
: Play projects from your USB drive or through the platform.
●
HDMI
: Play projects from the HDMI input source, for example, your computer.
To Next Page
Loading...
Need help?
General
