Dahua G Series User Manual

15
Set password for VTH Figure 4-4
On the Set VTO Password screen, enter the password of VTO and confirm it, and then tap Step 7
Next.
Set password for VTO Figure 4-5
Tap Initialize to complete the initialization of the VTO and the main VTH, and then tap Next. Step 8
You need to make sure that the IP addresses of the VTH and VTO on the same network
segment. Otherwise, VTH cannot obtain the information of VTO after configuration.

Dahua G Series Specifications

General

Brand	Dahua
Model	G Series
Category	Monitor
Language	English