Dahua N84B3P

User's Manual
234
Figure 5-195 UPnP
Step 2 Configure the settings for the UPnP parameters.
Table 5-58 UPnP parameters
Parameter
Description
Port Mapping
Enable the UPnP function.
Status
Indicates the status of UPnP function.
●
Offline: Failed.
●
Online: Succeeded.
LAN IP
Enter IP address of router on the LAN.
After mapping succeeded, the system obtains IP address automatically.
WAN IP
Enter IP address of router on the WAN.
After mapping succeeded, the system obtains IP address automatically.