User's Manual
263
Figure 5-222 iSCSI
Step 2 Set parameters.
Table 5-68 iSCSI parameters
Enter the server address of iSCSI server.
Enter the port of iSCSI server, and the default value is 3260.
Click Storage Path to select a remote storage path.
Each path represents an iSCSI shared disk and these paths are
generated when created on the server
Enter the username and password of iSCSI server.
If anonymous login is supported by iSCSI server, you can enable
Anonymous to log in as an anonymous user.
Step 3 Click Apply.
5.13 Account
You can manage users, user group and ONVIF user, and set admin security questions.
To Next Page
Loading...
