User’s Manual
21
Add VTS
Configure the parameters.
Table 5-3 Add VTS configuration
Parameter Description
VTS No. The number of the VTS.
Registeration
Password
Keep it default.
IP Address VTS IP address.
Click Save.
IPC Setting
You can add IPC and NVR to the VTO working as the SIP server, and then all the connected VTHs can
monitor them.
Interfaces might vary with different products. The actual interface shall prevail.
Log in to the web interface of the VTO working as the SIP server, and then select Household
Setting > IPC Setting.
To Next Page
Loading...
