Dahua VTH5221D User Manual

Interface Operation 61
Only devices with the wireless function can access to wireless network.
Figure 6-20
Figure 6-21
Set according to actual network access mode.
 LAN
Enter “Local IP”, “Subnet Mask” and “Gateway” manually, press [OK]. Or press
to enable DHCP function and obtain IP info automatically.
If the device has wireless function, please click “LAN” tab to set it.
 WLAN
Press to enable Wi-Fi function.

Dahua VTH5221D Specifications

General

Brand	Dahua
Model	VTH5221D
Category	Intercom System
Language	English