Interface Operation 62
The system displays available Wi-Fi list, as shown in Figure 6-22.
Figure 6-22
Connect Wi-Fi.
The system has 2 access ways as follows.
◇ At “WLAN” interface, select Wi-Fi, click “Wireless IP” tab to enter “Local IP”,
“Subnet Mask” and “Gateway”, and press [OK].
◇ At “WLAN” interface, select Wi-Fi, click “Wireless IP” tab, press to
enable DHCP function and obtain IP info automatically, as shown in Figure
6-23.
To obtain IP info with DHCP function, use a router with DHCP function.
To Next Page
