16
WLAN Figure 4-7
4.3.1.2 LAN
Tap and hold Setting for about 3 seconds, and enter the password that you set for the VTH. Step 1
Tap Network > LAN. Step 2
Enter local IP subnet mask and gateway that you plan for the VTH. Step 3
You can also tap to enable the DHCP function to obtain IP information automatically.
LAN Figure 4-8
Tap OK. Step 4
4.3.2 Configuring SIP Server
Tap and hold Setting for about 3 seconds, and enter the password that you set for the VTH. Step 1
To Next Page
Loading...
