EasyManuals Logo

Dahua VTO1220A Quick Start Guide

Dahua VTO1220A
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
错误!使用“开始”选项卡将 Heading 1 应用于要在此处显示的文字。 22
Select the server type you need in the Server Type list, and then see the
corresponding manual for the detailed configuration.
5.3.5 Adding VTO Devices
You can add VTO devices to the SIP server, and all the VTO devices connected to the same
SIP server can make video call between each other. This section applies to the condition in
which a VTO device works as SIP server, and if you are using other servers as SIP server, see
the corresponding manual for the detailed configuration.
Log in the web interface of the SIP server, and then select Household Setting > VTO
No. Management.
The VTO No. Management interface is displayed. See Figure 5-7.
VTO No. management
Click Add.
The Add interface is displayed. See Figure 5-8.
Add VTO

Other manuals for Dahua VTO1220A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua VTO1220A and is the answer not in the manual?

Dahua VTO1220A Specifications

General IconGeneral
BrandDahua
ModelVTO1220A
CategoryIntercom System
LanguageEnglish

Related product manuals