Dahua VTO2000A Connection Guide

Page10
Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
How to Configure: 1 VTO+m VTH
VTO Web Config
Main VTH Setup
①
Master VTH add VTO. Set room number as 101. Add
VTO2000A in ‘VTO Config’ and enable it.
（
Refer to page10-12
）
②
Extension VTH add VTO. Setup extension VTH’s room number
in ‘VTH Config’, press ‘Master’ and switch to ‘Extension’. Set the
room number as 101-1
③
input the master VTH’s IP, master name: admin, master pwd:
888888.
Note: maximum support 5 VTH (1 main VTH and 4 extension VTH). The master VTH’s room number is set
as 101, and extension VTH’s room number should set as 101-1,101-2,101-3,101-4.
Extension VTH Setup
2
3

Dahua VTO2000A Specifications

General

Brand	Dahua
Model	VTO2000A
Category	Intercom System
Language	English