6
Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: sales@cop-eu.com | Online: www.cop-eu.com
Before confi guring the VTH it must fi rst be initialised. Follow the on screen wizard to set an admin password. The password can only
be made up of numbers.
To confi gure the VTH unit use the built in menu within the monitor itself. VTH units do not support web browser confi guration.
Hold down the Settings button for 5 seconds and enter the admin password set during the initialisation wizard.
If the settings button is only pressed and not held, entering the password 123456 will enter the user settings rather than engineer
settings.
In the settings menu select Network to confi gure the VTH network settings. When confi guring the network address of the VTH it is vital
to ensure the IP address range is within the same Subnet as the VTO.
VTH Monitor Confi guration
To Next Page
Loading...
