Dahua VTO3211D-P User Manual

错误!使用“开始”选项卡将 Heading 1 应用于要在此处显示的文字。 25
which a VTO device works as SIP server, and if you are using other servers as SIP server, see
the corresponding manual for the detailed configuration.
Log in the web interface of the SIP server, and then select Household Setting > VTO
No. Management.
The VTO No. Management interface is displayed. See Figure 4-9.
VTO No. management
Click Add.
The Add interface is displayed. See Figure 4-10.
Add VTO
Configure the parameters, and be sure to add the SIP server itself too. See Table 4-2.
Table 4-2 Add VTO configuration
Parameter
Description
Rec No.
The VTO number you configured for the target VTO. See
the details in "4.3.2 Configuring VTO Number."

Dahua VTO3211D-P Specifications

General

Brand	Dahua
Model	VTO3211D-P
Category	Intercom System
Language	English