6
4 Web Configuration
This chapter introduces how to initialize, connect, and configure parameters for the door
stations to realize functions like device management, calling, and monitoring. For more details,
see the user manual.
Configuration Process 4.1
Plan IP address and number for each door station and indoor monitor. Step 1
Make sure that there is no short circuit or open circuit in the circuits. Step 2
Configure door station (VTO). Step 3
Beside initializing web interface and modifying IP address, configurations will be
different depending on SIP server types.
1) When the door station you are operating works as the SIP server, refer to "4.4.1
Door Station (VTO) as SIP Server."
2) When the management platform works as the SIP server, refer to "4.4.2 Platform
(DSS Express/DSS Pro) as SIP Server."
Configure indoor monitors (VTH). See the indoor monitors (VTH) users' manual or the Step 4
door station user’s manual.
Initializing Web Interface 4.2
For the first time login, you need to create a password for logging in to the web interface.
The default IP address of door station is 192.168.1.108. Make sure that the PC IP address is in
the same network segment as that of the door station.
Connect the door station to power source, and then start it. Step 1
Open the browser on the PC, enter the default IP address of the VTO in the address Step 2
bar, and then press Enter.
To Next Page
Loading...
Need help?
General
