Dahua VTO65 Series User Manual

9
SIP server Figure 4-4
Select a SIP server. Step 3
4.4.1 Door Station (VTO) as SIP Server
Select the Enable check box next to SIP Server. Step 1
Select VTO from the Server Type drop-down list Step 2
Configure parameters (see Table 4-3 for details). Step 3
Click Save. Step 4
The door station (VTO) will restart automatically.
4.4.1.1 Setting Door Station (VTO) No. (1)
Each door station (VTO) has a unique number. The numbers are normally the same as building
numbers.
 You can change the number of a door station (VTO) when it does not work as a SIP server.
 Door station (VTO) numbers can contain 5 numbers at most, and it cannot be the same as
any room number.
Log in to the web interface. Step 1
The homepage is displayed.
Select Local Setting > Basic. Step 2
Device properties
Figure 4-5
In the VTO No. input box, enter the door station (VTO) number you planned, and then Step 3
click Confirm to save the configuration.

Dahua VTO65 Series Specifications

General

Brand	Dahua
Model	VTO65 Series
Category	Gate Opener
Language	English