To Next Page

To Previous Page

SiBE121123_A Service Check Function

Service Diagnosis 152

3.2.4 BRC7E530W

To find the error code, proceed as follows:

Step Action

1 Press the [Inspection / Test] button to enter the inspection mode. Then the figure 0

blinks on the UNIT No. display.

2 Press the [UP] or [DOWN] button and change the UNIT No. until the receiver of the

remote controller starts to beep.

[Inspection / Test] button

(R14392)

[UP] button

[DOWN] button

(R15408)

If you hear... Then...

3 short beeps Follow all steps below.

1 short beep Follow steps 3 and 4. Continue the

operation in step 4 until you hear a

continuous beep. This continuous

beep indicates that the error code

is confirmed.

1 continuous beep There is no abnormality.

Daikin 2AMX40G3V1B User Manual

Other manuals for Daikin 2AMX40G3V1B