Need help?Do you have a question about the Daikin 2AMK40FV1B and is the answer not in the manual?
General| Brand | Daikin |
|---|---|
| Model | 2AMK40FV1B |
| Category | Air Conditioner |
| Language | English |
Detach the right side panel by removing its screws.
Unscrew and pull out the partition plate.
Release strings, open, and remove all sound blankets (outer, top, inner, bottom).
Remove the washer fitted nut and detach the outdoor fan.
Disconnect motor, release wires, remove fixing frame, and detach the fan motor.
Release discharge pipe and heat exchanger thermistors from their connections.
Cut clamp, peel putty, and remove liquid/gas pipe thermistors.
Detach coils, remove terminal cover, and putty from the valve area.
Heat and disconnect outdoor electronic expansion valves and the four way valve.
Remove terminal cover, disconnect terminals, and detach overload protector.
Remove nuts, heat and disconnect piping, then lift compressor.
To Next Page