SiBE121123_A Field Settings
Trial Operation and Field Settings 232
BRC1E51A7
a Unit No.
b First code No.
c Second code No.
d Mode
Step Action Remote controller
1
Press and hold the [Cancel] button ( )
for 4 seconds to enter the Field setting
menu.
2
Use the buttons to select Field setting
list and push the [Menu/Enter] button ( ).
3
Use the buttons to select the desired
Mode.
4
During group control, when setting by each
indoor unit (Mode 20, 21, 22 and 23 have
been selected), push the button to
highlight and buttons to select the
INDOOR UNIT NO. to be set. This operation
is unnecessary when setting by group.
5
Highlight the second code No. to be changed
using the buttons, and use the
buttons to select the desired second code No.
When setting by group, all of the second
code No. that may be set are displayed
as “*”.
6
Push the [Menu/Enter] button ( ) to
display the confirmation screen.
7
Use the buttons to select Yes and push
the [Menu/Enter] button ( ).
When multiple setting changes are
needed, repeat steps 3 to 7.
8
Push the [Cancel] button ( ) 2 times to
return to basic screen.
a
b
c
d
(R12878)
(R12879)
To Next Page
Loading...
Need help?
General
