6 Finishing the outdoor unit installation
Installation manual
14
EPRA14~18DAV3+W1
Daikin Altherma 3 H HT
4P586100-1 – 2019.07
5.4 To reposition the air thermistor on
the outdoor unit
This procedure is only necessary in areas with low ambient
temperatures.
Required accessory (delivered with the unit):
Thermistor fixture.
6 Finishing the outdoor unit
installation
6.1 To close the outdoor unit
NOTICE
When closing the outdoor unit cover, make sure that the
tightening torque does NOT exceed 4.1N•m.
6.2 To install the discharge grille
Install the lower part of the discharge grille
1 Insert the hooks.
2 Insert the ball studs.
3 Fix the 2 lower screws.