Daikin Altherma 3 R MT - Starting up the Outdoor Unit

8 Starting up the outdoor unit
Installation manual
15
ERRA08~12E
Daikin Altherma 3 R MT
4P708481-1 – 2023.02
4×
2 Remove the lower part of the discharge grille.
4×
3 Rotate the lower part of the discharge grille.
4 Align the ball stud and hook on the grille with their counterparts
on the unit.
5 Insert the hook.
6 Insert the ball stud.
6
5
8 Starting up the outdoor unit
See the indoor unit installation manual for configuration and
commissioning of the system.
WARNING
Rotating fan. Before powering ON or servicing the outdoor
unit, make sure that the discharge grille covers the fan as
protection against a rotating fan. See:
▪ "7.3To install the discharge grille"[414]
▪ "7.4To remove the discharge grille, and put the grille in
safety position"[414]